 |
|
Available Sizes: |
Price: |
| 2.50" OD x 6.00" |
$38.00 |
| 3.00" OD x 6.00" |
$43.00 |
| 3.50" OD x 6.00" |
$49.00 |
| 4.00" OD x 6.00" |
$58.00 |
| |
| 2.50" OD x 12.00" |
$50.00 |
| 3.00" OD x 12.00" |
$58.00 |
| 3.50" OD x 12.00" |
$67.00 |
| 4.00" OD x 12.00" |
$80.00 |
|
|
|
Mark II Basic Pressure Hull:
The Mark II Basic Pressure Hull combines the 3 basic parts of
the submarine; battery compartment, ballast tank and pressure hull into a single
combined unit. This allows for the easy transfer of the Mark II between
different submarine hulls.
|
|
|
Now in 3 different sizes! |
|
2.50" x 25.50" Perfect for
smaller boats in 1:96 scale. Pressure hull is 12" long, Ballast tank
is 6" and battery compartment is 6 1/2". Pressure hull and Ballast tank
can be shortened if needed. The battery compartment can hold up to 2, 6-cell,
7.2 volt packs. This is perfect if you plan to upgrade your Dumas AKULA.
|
$ 150.00
|
|
3.00" x 25.50" Perfect for medium
sized boats in 1:96 scale. Pressure hull is 12" long, Ballast tank is 6"
and battery compartment is 6 1/2". Pressure hull and Ballast tank can be
shortened if needed. The battery compartment holds 2, 6-cell, 7.2 volt packs.
|
$ 175.00
|
|
3.50" x 25.50" Perfect for large
boats in 1:96 scale or medium sized boats in 1:72 scale. Pressure hull is
12" long, Ballast tank is is 6" and battery compartment is 6".
Pressure hull and Ballast tank can be shortened if needed. The battery
compartment can hold a 6 volt, 4AH gel cell.
|
$ 205.00
|
|
|
|
2.50" Assembled Basic Pressure Hull
|
|
Pre-Assembled Pressure Hulls
Pre-Assembled pressure hulls, 12" long. Just add your own radio system and
electronics. Save time and effort building your next submarine with our
pre-assembled units. We do all the hard work! We drill the holes! We install the
seals and set up the motors! Get your model up and running in less time, and
less time building, means more time in the water!
|
|
2.50" Pre-Assembled pressure hull.
Includes: Basic Pressure Hull, 380 size Motor, 3:1 drive unit, Equipment tray,
Servo Tray for micro servos, Shaft seal, Push rods and Push rod seals. This
cylinder is a good upgrade for the Dumas AKULA.
|
$ 255.00
|
|
3.00" Pre-Assembled pressure hull.
Includes: Basic Pressure Hull, 540 size Motor, 3:1 drive unit, Equipment tray,
Servo Tray for standard servos, Shaft seal, Push rods and Push rod seals.
|
$ 270.00
|
|
3.50" Pre-Assembled pressure hull.
Includes: Basic Pressure Hull, 540 size Motor, 3:1 drive unit, Equipment tray,
Servo Tray for standard servos, Shaft seal, Push rods and Push rod seals.
|
$ 280.00
|
|
4.00" Pre-Assembled pressure hull.
Includes: Basic Pressure Hull, 540 size Motor, 3:1 drive unit, Equipment tray,
Servo Tray for standard servos, Shaft seal, Push rods and Push rod seals.
|
$ 290.00
|